Your Cart is Empty
Classic Pig Sticker Knife
$149.99
PIG STICKER
Constructed using a screwed design, the Classic Series Pig Sticker features a natural maple burl wood handle, highly polished brass bolster and a premium quality 5cr15 stainless steel blade that holds an edge pig after pig. The blade is hollow ground with a blood groove and brushed finish.
- Blade length 190mm
- Total length 330mm
- Weight 325g
- Durable full-grain leather sheath
- Lifetime warranty
THE CLASSIC SERIES KNIVES
The Classic Series butchering knives are handcrafted using the finest materials, fittings and workmanship. Natural maple burl wood handles, highly polished brass bolsters, and premium quality 5cr15 stainless steel blades that hold an edge deer after deer. Rugged and durable enough for all skinning and dressing jobs, as well as everyday use. 5cr15 alloy was selected for the blades, due to its specific chemical make-up, with a similar hardness to 440a but with less chromium and carbon. Unlike other common stainless steels, 5cr15 alloy has a percentage of vanadium added to increase tensile strength and impact strength. These are easily sharpened in the field. These characteristics have been selected for hunter demands worldwide, and the designs have proven successful in New Zealand. All Classic Series also come with a lifetime warranty.
MEN'S JACKETS AND TOPS
Place the tape measure around the large part of your chest, usually just below the arm pits. Don't stretch the tape too tight. Align this measurement with the table below to help select your size. Our Mid layer range tops meet the same measurements of the base layerrange tops. Outer layers are made larger to accommodate layers underneath. 
MEN'S OUTER LAYER JACKETS
|
SIZE
|
CHEST CM
|
CHEST INCHES
|
|
XXS
|
85-90
|
33-35
|
|
XS
|
90-95
|
35-37
|
|
S
|
95-100
|
37-39
|
|
M
|
100-105
|
39-41
|
|
L
|
105-110
|
41-43
|
|
XL
|
110-115
|
43-45
|
|
2XL
|
115-120
|
45-47
|
|
3XL
|
120-125
|
47-49
|
|
4XL
|
125-130
|
49-51
|
|
5XL
|
130-135
|
51-53
|
MEN'S BASE & MID-LAYER TOPS
|
SIZE
|
CHEST CM | CHEST INCHES |
| XXS | 85-90 | 33-35 |
| XS | 90-95 | 35-37 |
| S | 95-100 | 37-39 |
| M | 100-105 | 39-41 |
| L | 105-110 | 41-43 |
| XL | 110-115 | 43-45 |
| 2XL | 115-120 | 45-47 |
| 3XL | 120-125 | 47-49 |
| 4XL | 125-130 | 49-51 |
| 5XL | 130-135 | 51-53 |
MEN'S PANTS & SHORTS
WAIST: Place the tape measure around your waist, just above where your pants would normally naturally rest. Don't pull the tape tight, but make sure it is snug. Align this measurement with the table below to help select your size.
INSEAM: This is the measurement from the center of the crotch on our pants, to the base of the inner leg.
Our over-trousers are designed to be worn over the top of your regular pants. The sizing is therefore larger than our regular pants.
MEN'S PANTS & SHORTS
| SIZE | WAIST CM | WAIST INCHES | INSEAM CM |
| XXS | 71-74 | 28-29 | 78 |
| XS | 75-79 | 30-31 | 79 |
| S | 80-84 | 32-33 | 80 |
| M | 85-89 | 34-35 | 81 |
| L | 90-94 | 36-37 | 82 |
| XL | 95-99 | 38-39 | 83 |
| 2XL | 100-104 | 40-41 | 84 |
| 3XL | 105-109 | 42-43 | 84 |
| 4XL | 110-114 | 44-45 | 85 |
| 5XL | 115-120 | 46-47 | 85 |
MEN'S OVER-TROUSERS
|
SIZE
|
WAIST CM
|
WAIST INCHES
|
INSEAM CM
|
|
XS
|
83-86
|
33-34
|
79
|
|
S
|
87-90
|
34-35
|
80
|
|
M
|
91-94
|
36-37
|
81
|
|
L
|
95-98
|
37-38
|
82
|
|
XL
|
99-102
|
39-40
|
83
|
|
2XL
|
103-106
|
41-42
|
84
|
|
3XL
|
107-110
|
42-43
|
84
|
|
4XL
|
111-114
|
44-45
|
85
|
WOMEN'S SIZING
Place the tape measure around the largest part of your chest, the narrowest point on your waist and the just above where your pants normally sit on your waist. Don't stretch the tape too tight. Align these measurement with the table below to help select your size. Outer layers are made larger to accommodate layers underneath.
WOMEN'S SIZING GUIDE
|
SIZE
|
CHEST
|
WAIST
|
HIPS
|
| 6 | 79cm / 31" | 70cm / 27.5" | 102cm / 40.2" |
|
8
|
84cm / 33"
|
74cm / 29.1"
|
106cm / 41.7"
|
|
10
|
89cm / 35"
|
78cm / 30.7"
|
110cm / 43.3"
|
|
12
|
94cm / 37"
|
82cm / 32.3"
|
114cm / 44.9"
|
|
14
|
99cm / 39"
|
86cm / 33.9"
|
118cm / 46.4"
|
|
16
|
104cm / 41"
|
90cm / 35.4"
|
122cm / 48"
|
|
18
|
109cm / 43"
|
94cm / 37"
|
126cm / 49.6"
|
|
20
|
114cm / 45"
|
98cm / 38.6"
|
130cm / 51.2"
|
BOOT SIZING
All sizes are US men's sizing. Measure from the from the back of your heel to the end of your longest toe. Use your foot measurement to select the closest boot size.
BOOT SIZING GUIDE
|
US
|
FOOT LENGTH (approximate)
|
| 6 | 9.3 in / 23.6 cm |
| 7 | 9.6 in / 24.4 cm |
| 8 | 9.9 in / 25.2 cm |
| 9 | 10.25 in / 26 cm |
| 10 | 10.6 in / 26.8 cm |
| 11 | 10.9 in / 27.8 cm |
| 12 | 11.25 in / 28.6 cm |
| 13 | 11.6 in / 29.4 cm |
GAITER SIZING
Measure the circumference of calves at the thickest point. The size on the chart is the largest measurement that will fit in the gaiter. Gaiters can be tightened, but cannot be stretched to fit legs larger than the measurements shown on the chart.
GAITER SIZING GUIDE
|
SIZE
|
CALF SIZE | GAITER LENGTH |
|
S
|
380mm | 415mm |
|
M
|
410mm | 415mm |
|
L
|
440mm | 445mm |
|
XL
|
470mm | 445mm |
|
2XL
|
500mm | 445mm |
GLOVE SIZING
|
SIZE
|
LENGTH CM | WIDTH CM |
| S | 18 | 9 |
| M | 19 | 9.5 |
| L | 20 | 10 |
| XL | 21 | 10.5 |
TOLL NZ or CourierPost NZ | 2 - 5 WORKING DAYS (off-peak times)
Black Friday Week Update: Due to the high volume of orders, dispatch timeframes may be extended, so please factor in additional business days for your order to be processed, and delivered. Our dedicated team is putting in extra effort to ensure swift dispatch. We appreciate your patience and support during this busy time!
Order Value |
Shipping Cost |
$0.00 - $199.99 |
$9.99 |
$200+ |
Free |
WARRANTIES
1 YEAR WARRANTY
If within one year your Hunters Element product is found to have a manufacturer fault in any way, we will repair or replace it for free!
LIFETIME EXTENDED WARRANTY
We are so confident in the quality of our gear that if at any point in its life your Hunters Element kit gets damaged, we'll sort you out. If you've torn it on an antler, punctured it with a thorn or crushed a zip between rocks, we'll repair it (if we can) for a small fee. Some jobs are easier than others though, so you should check out our Product Care Guide to get the best life out of your gear.
RETURNS
DEFECTIVE MERCHANDISE:
Returns for manufacturer defects will be accepted. Please try to include all original packaging and materials including boxes, manuals, warranty cards, instructional DVDs, and any other materials in the original shipment or packaging.
INCORRECT MERCHANDISE:
Contact us via e-mail or phone if you received an item different than what was described on the website or is the wrong size, color, or style than what you ordered. Get in touch via our Contact Us page and we'll help you out!
SIZING RETURNS & OTHER:
For online orders where you would like to change the size of one or more products, please contact us first. Once you have filled in a return request and we receive the product back (still in new brand-new condition with the swing tags included), we will issue with a store credit to the same value. You can then purchase the new size and it will be sent out as normal.
For a successful return request please attach a photo of the product showing the defect, or for size swaps, show the product in new condition with the tags on and a description to match.
HOW TO RETURN:
For online orders, submit a return request here.
Please use the Contact Us page to contact us to discuss a return process.
Shipping and handling charges will not be refunded for returns or repairs unless an error occurred on our part in the shipment of your order.
SALE ITEMS
All items purchased on SALE (discounted price) are final. Some products may be exchanged if there are replacement sizes available, but this is at the full discretion of Hunters Element Staff. Staff hold the right to refuse exchanges or returns.
